Home › Guides › QR Codes Explained: Static vs Dynamic, Error Correction, Size and Printing

QR Codes Explained: Static vs Dynamic, Error Correction, Size and Printing

By SmarTech Apps · Last updated · 6 min read

QR codes are everywhere: menus, posters, business cards, Wi-Fi sharing and event tickets. They look like magic, but they are simply a way of printing a short piece of text as a pattern a camera can read. Making one takes seconds, and making one that scans reliably on a crumpled flyer is a matter of a few well-known rules. This guide explains how QR codes work, what static and dynamic mean, how error correction affects them, and how to choose size and colours for print and screens.

Advertisement

What a QR code stores

A QR code is a two-dimensional barcode that encodes text. A scanner decodes the text and the phone decides what to do with it: open a link, show a message, start an email, dial a number, join a Wi-Fi network or add a contact. The more text you put in, the denser the pattern becomes, with smaller squares, and the harder the code is to scan from a distance. Short content means a simpler code, so use short links and keep text brief.

Static versus dynamic codes

This distinction causes the most confusion, and some websites muddy it on purpose.

A static QR code contains your actual content. If it holds a web address, the address is printed into the pattern. It never expires, needs no account, cannot be switched off by a vendor and costs nothing to keep. The downside is that it cannot be changed: if the destination moves, you must create and reprint a new code.

A dynamic QR code contains a short address on a redirect service, and that service forwards visitors to the real destination. You can change the destination later and often get scan statistics. The downside is dependence: the code works only while the service is running and, in many cases, while you keep paying for it. If the subscription lapses, a printed code can stop working.

What we offer is the static kind. Our generators create QR codes that carry your content directly, with no tracking redirect, no account and no expiry. If you need to change destinations after printing or want scan analytics, you need a redirect service, and you should be aware of the dependency before putting it on thousands of printed items. A practical middle path is to encode a web address on a domain you control, then change what that page does whenever you like.

Making a code step by step

  1. Choose the right generator: QR Generator for a web address, plain text, email, phone number or SMS; WiFi QR so guests can join your network by scanning; vCard QR to share a contact; Event QR to add an event to a phone calendar; or Bulk QR to make one code per line of a list and download them in a ZIP.
  2. Enter the content. For links, include the full https:// address and double-check spelling; a typo is printed forever.
  3. Choose the size (in pixels), error correction level and colours.
  4. Download the PNG image.
  5. Test it with at least two phones, or with QR Reader, before you print or publish. Scan the actual printed sample at its real size, not just the screen.

Error correction: L, M, Q and H

QR codes include redundancy so they can be read even if part of the pattern is dirty, damaged or covered. The generator lets you choose the level:

Higher correction means more of the code is spent on redundancy, so the same content produces a denser pattern with smaller squares. Use L or M for clean screens and carefully printed paper with short content. Use Q or H for items that will be handled, scratched or exposed to weather, such as stickers and outdoor signs. If you see a message that the text is too long, shorten the content or lower the error correction level.

Size and distance

A common rule of thumb is that the scanning distance should be about ten times the width of the code. A code printed 2.5 cm wide scans comfortably from about 25 cm, which suits a business card or a menu at arm's length. A poster viewed from two metres needs a code about 20 cm wide. As a minimum for print, avoid going below about 2 cm for simple content. For screens, make sure the code is large enough to be shown at a comfortable size with enough pixels per square.

When you choose the pixel size in the generator, think of it as the resolution of the PNG. Larger is safer for printing: a 1000 to 2000 pixel image scales down cleanly, whereas stretching a small image blurs the square edges. The generator accepts sizes from 64 up to 2048 pixels.

Colour, contrast and the quiet zone

Printing tips

Print a test and scan it before ordering a large run. Use matte paper or a non-reflective finish, since glossy surfaces create glare. Leave plenty of margin from folds, edges and perforations. Do not print codes across a fold or on curved surfaces if you can avoid it, and keep the ink dark and not blurred. For vector-quality printing, large format signs should be produced at high resolution; export the largest PNG size and place it at the intended physical dimensions rather than enlarging a small image. Put a short line of text next to the code saying what it does, for example "Scan for the menu", and if it points to a web address, consider also printing a short readable version of the address as a fallback.

Safety and good manners

Because a QR code hides its content, treat scanned codes with the same caution as links. Do not scan codes on stickers placed over other codes, check that the address shown by your phone looks right before you open it, and be wary of codes that ask for payments or passwords. When you create codes for others, send people to pages on a domain you control, use https, and tell them what to expect. For Wi-Fi codes, remember that anyone who scans the code gets the password, so print it only where you are happy for people to join, and change the password if the code goes somewhere public. Finally, the PNG you download is an image like any other; our guide to image formats explains why PNG is the right format for sharp, square-edged graphics such as QR codes.

Written by SmarTech Apps. General information only, not legal or professional advice. Questions or corrections? Contact us.